TCT Saw Blade for Chipboard, MDF, Laminated Board

TCT Saw Blade for Chipboard, MDF, Laminated Board

The TCT saw blade for chipboard, MDF, laminated board is professionally designed to cut MDF, HDF, laminated board, shaving board and other materials, according to hardness and other characteristics. As the tungsten carbide is sintered by pulverous hard materials and filler, it has better abrasion-resistant performance compared to common steel and excellent rigidity even under high temperature. The TCT saw blade for chipboard, MDF, laminated board is made of tungsten carbide by BOSUN with a high processing precision and superb cutting effect. It is widely used by board manufacturer and furniture companies.

Adaptive to precision table saws and automatic edger, the cutting surface of timber is smooth and clean, without burrs or damage to the edge. There are some do's and don'ts that need attention to maintain a long service life of the TCT saw blade for chipboard, MDF, laminated board. The first is that the saw blade should be placed in a flat way or hung up through its inner hole with no other objects on it when it is not used. Footstep, moisture and corrosion must be avoided on the TCT saw blade for chipboard, MDF, laminated board.

When the saw blade is no longer sharp, it has to be grinded again. The original angle of the segments and the dynamic balance must be unchanged. The modification of the inner bore and the process of locating holes must be conducted by BOSUN because inappropriate process would affect its performance and even cause danger. The expansion of the original hole must be kept less than 20 mm in case of interrupting the balance of stress.

Specifications of the TCT Saw Blade for Chipboard, MDF, Laminated Board

ITEM NO. D-mm B-mm d-mm z
WLZ254080P 254 3.2 30 80
WLG254080U 300 3.2 30 72
WLG300080U 300 3.2 30 80
WLG300080P 300 3.2 30 80
WLG300096P 300 3.2 30 96

BOSUN is a professional TCT saw blade for chipboard, MDF, laminated board manufacturer and supplier in China. We offer a wide variety of products, including special steel cutting saw blade, diamond core bit, general purpose blade, floor saw and much more.

Related Products
Feedback Form
Other products
    1. Scoring Circular TCT Saw BladeThe scoring circular TCT saw blade is specially designed to slot at the bottom of different kinds of veneers including cork, hardwood, cut deal, shaving board, single-side veneered shaving board, two-side veneered shaving board, two-side plastic veneered shaving board, single-side veneered MDF board, plywood, fibre board, etc.
      Avoiding the crack of veneers and featured by a high precision and a sharp cutting edge.
    1. TCT Saw Blade for Plywood, Block BoardThe TCT saw blade for plywood and block board by BOSUN is a kind of professional woodworking saw blade that features sharp edge, long service life and good cutting quality. It is adaptive to manual edger and automatic edger and is widely applied in decoration, construction and engineering industries to cut plywood, building formwork and block board.
      The TCT saw blade for plywood and block board can keep a smooth ...